Beisler 58 Instructions d'exploitation télécharger pdf (Page 25)

2-5

Attention

The machine will be destroyed by connecting to a wrong mains voltage!

Check, whether the requirements from chapter ‘Technical data’ meet the

local conditions.

1. Use the power cord located at the backside of the machine.

2. Plug it into a socket.

3. Lay the cord in a way, that the danger of stumbling is avoided.

Danger

Danger to life from unsufficient grounding! Do a grounding according to DIN

EN 60204-1.

2.4 First putting into operation

This machine has been configured to the individual requirements of the

customer. The first putting into operation can be done easily:

1. Adjust the machine to a horizontal stand.

2. Connect power and air supply.

3. Switch on the machine using the mains / emergency stop switch at the

front side of the machine.

4. Check all security systems for function and efficiency.

Danger

The machine may only be used for production purposes, after the security

systems have been checked. If a security doesn’t work adequately, it must be

repaired first.

As a factory setting, several production programs are contained in the buffer

of the machine. You may use one of them or create your own programs.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 77 78

Pas de commentaire

Beisler 58 Instructions d'exploitation Page 25