Beisler 58 Instructions d'exploitation télécharger pdf (Page 77)

3-27

5.3.6 Arrangement of the mitre knife during flap

pocket production

The photo shows the correct Arrangement of the mitre

knife during flap pocket production.

5.4 Split needle (Beisler sewing head)

5.4.1 Distance to cylinder of the top threat catcher

There must be a distance on at least 0.5 mm between

the pushing block of the split needle (1) and the cylinder

of the top threat catcher.

If required, loosen the fixing screws (3) of the top threat

catcher (2) and move it, until the minimum distance is

kept. Tighten the fixing screws again.

5.4.2 Center adjustment

The setting ring of the split needle (1) must be in the

middle of the rectangular metal frame while in home

position.

If required. loosen the fixing screw of the setting ring

and move him. Tighten the fixing screw again.

5.5 Vylene adjustments

5.5.1 Correct vylene adjustment

The vylene strip (3) must be seen with the inserted sli-

ding plate but set back from the front edge of the vylene

supply for the distance (A) of 3 mm.

1: Vylene plate

2: Counter knife

1 2 ... 72 73 74 75 76 77 78

Pas de commentaire

Beisler 58 Instructions d'exploitation Page 77