Beisler 58 Instructions d'exploitation télécharger pdf (Page 55)

3-5

1 Clamp adjustment

The following assemblies must be distinguished in the

clamp area:

1. Clamp motor

2. Clamp carriage

3. Clamp drive belt

4. Clamp arms

5. Main clamp

1.1 Clamp drive belt

The clamp must stand in home position (like shown in

the upper picture).

The drive belt (1) must have enough tension that it gives

about 15 mm when loaded with 1 kg (in the middle bet-

ween both belt disks).

If required, loosen both fixing screws (2) and adjust the

set screws (3). Tighten the fixing screws (2) again.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 77 78

Pas de commentaire

Beisler 58 Instructions d'exploitation Page 55