Beisler 58 Instructions d'exploitation télécharger pdf (Page 67)

3-17

3 Adjustments at the sewing head

3.1 Height adjustment

The ground plate of the sewing head must be levelled

with the upper edge of the working table.

To adjust height and horizontal level loosen the nuts (1)

and adjust them by turning in or out. Tighten the counter

nuts again.

3.2 Lateral adjustment

The stitch plate (2) of the sewing head (1) must be exa-

ctly in the gap of the sliding plate (3).

Loosen the fixing screws in the mounting frame (see

section 3.1) and level the sewing head exactly. Tighten

the fixing screws again.

3.3 Driving belt tension of the sewing

motor

It must be possible to push down the driving belt (2) of

the sewing motor (1) for 20 mm in its middle.

To adjust the tension loosen the fixing screws (3) of the

motor and move him vertically until the correct tension is

present. Tighten the fixing screws again.

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 77 78

Pas de commentaire

Beisler 58 Instructions d'exploitation Page 67