Beisler 58 Instructions d'exploitation télécharger pdf (Page 60)

3-10

1.16 Flap clamp position

The flap clamps must stand in a distance of 5 mm paral-

lel to the inner side of the main clamp.

To adjust the flap clamp, loosen the fixing screws (1) of

the flap clamp beam. Adjust the flap clamp correctly and

tighten the fixing screws (1) again.

1.15 Adjust folding slide

A turn movement of the folding slide must be assured

which allows him to adjust to the strength of the sewing

material.

Adjust the screws (1) to adjust the folding slide with no

free play axially.

1.14 Adjust parallelity of folding slide

In driven in state, the folding slide must be parallel to

and 0.5 mm away from the edge of the main clamp.

This can be adjusted with the fixing screws of the fol-

ding slide cylinder (1).

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 77 78

Pas de commentaire

Beisler 58 Instructions d'exploitation Page 60