Beisler 58 Instructions d'exploitation télécharger pdf (Page 43)

2-23

You can use one of serveral possibilities to load data from the Memory Card.

Press the key

F2 to load the active seam (which is currently displayed in the

operating device) from the Memory Card;

F4 to load all seam orders;

F6 to load all variables.

If you want to load all your data from the Memory Card, you should press the

F5-key.

5.4 Loading data from the EPROMs

If desired, you can load the factory-set basic and seam parameters from the

EPROMs (not from the Memory Card). This can be necessary after a

complete loss of data.

5.4.1 Loading the basic parameters

1. Press the P-key.

2. Press the F5-key.

3. Press the F3-key.

4. Enter the number ‘1’ and press the ENT-key.

The basic parameters saved in the EPROM will be loaded and overwrite the

parameters saved in the operating device. This resets the basic parameters

to factory-set conditions.

5.4.2 Loading seam parameters

1. Press the P-key.

2. Press the F5-key.

3. Press the F4-key.

4. Enter the number ‘1’ and press the ENT-key.

The seam parameters saved in the EPROM will be loaded and overwrite the

parameters saved in the operating device. This resets the seam parameters

to factory-set conditions.

5.5 Test programs and diagnostics

This machine contains a huge variety of test programs, with which all

functions can be individually tested.

5.5.1 I/O-Test

1. Press the P-key.

2. Press the F6-key.

3. Press the F1-key.

4. Execute the desired actions (see further below).

5. Press the P-key to end the test.

All inputs with their numbers will be displayed in the upper half of the display.

The inputs displayed inverted are currently active.

All outputs with their numbers are displayed in the lower half of the display.

The outputs displayed inverted are currently active.

You can now select an output using the arrow keys and activate or de-

activate it by pressing the ENT-key. If you press the ENT-key longer than two

seconds, the output switches between active and de-active, unitl you press

the ENT-key again (shortly).

The following inputs and outputs are available in this machine.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 77 78

Commentaires sur ces manuels

Pas de commentaire

Beisler 58 Instructions d'exploitation Page 43

Commentaires sur ces manuels

Produits connexes et manuels pour Machines à coudre Beisler 58