Beisler 58 Instructions d'exploitation télécharger pdf (Page 56)

3-6

1.2 Adjust axial free play of the clamp

arms

The clamp arms (1) must be adjusted without free play.

Although they have to move easily.

Check the correct adjustment from time to time. If requi-

red, you can adjust the axial free play of the clamp arms

with the screws (2).

1.3 Parallelity of the clamp arms to the

sewing head

This is adjusted in the factory and doesn’t have to be

changed.

1.4 Lateral adjustment of the double

piping

Insert the folder for the double piping.

The distance between the inner side of the main clamp

and the sole edge at the folder shall be 1.5 mm on the

right and left side (see right).

This distance can be adjusted with the setting rings (1).

1.5 Lateral flap adjustment

Insert the folder for single piping.

There should be a distance of 1.5 mm between the in-

ner side of the clamp and the sole of the folder.

This can be adjusted with the two outer setting rings (1).

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 77 78

Pas de commentaire

Beisler 58 Instructions d'exploitation Page 56